how to hang led strip lights without damaging wall

Learn How to Hang LED Strip Lights without Damaging the Wall

When installing LED strip lights in your home, whether it’s an entire room or just a feature wall, the thing you want to avoid the most is causing damage to the walls. While these lights are typically flexible and easy to bend, you still want to hang them with care so they look their best and last as long as possible. The good news is that hanging these lights is not too difficult at all and if you follow the tips below you should be able to enjoy your lights without worry!

What is the Best Place to Install LED Strip Lights?

Installation of LED Strip with Warm Yellow Light on the Door for Decorative Lighting

To maximize the effect of the LED strip lights, you should carefully think about where to place them. For example, you might want one at each corner for maximum coverage. The other option is to space them out across the ceiling or a wall strategically. You may also choose to have one running up and down a staircase for a dramatic look when entering and exiting your home!

LED strip lights work perfectly under cabinets. You can use under-cabinet lights to provide light beneath your cupboards. Some people prefer a lighting technique called edge lighting, in which specific areas are brightly lit and others are not. This can be achieved by placing LED strip lights near where two walls meet or along a corner. If you choose an under-counter lighting kit, it is best to choose those with lights that snap into place so they don’t fall during the movement of kitchen cabinets.

Also, lighting the back of your computer or TV screen with LED strip lights can reduce eye strain and improve visual clarity. If you need an extra reading light, LED strip lights can be set up behind the couch or chair where you are reading. A single strand of LEDs provides adequate illumination while being unobtrusive. They can also function as ambient lighting, subtly illuminating an entire room without producing glare and distraction from any sources of light present within the area.

How to Prepare the LED Strip Lights for Installation

LED strip lights are versatile and energy-efficient, adding accent lighting to any room. But before you start sticking them up all over your walls, there are a few things you need to do to prepare them for installation.

First, carefully measure the distance between each light, so they are spaced evenly across the space. Then, ensure that you have a good power source or extension cord nearby to plug in the LED lights once installed. And finally, use adhesive strips or silicone sealant to keep moisture out of sensitive components inside the fixtures and prevent water damage when hung outside windows or near running water sources like faucets.

Take care to peel off the adhesive strips and press them firmly onto the mounting surface (usually the ceiling). Make sure you don’t cover up any of the led lights on the strip with their protective film until they’re securely mounted. If it’s an outdoor installation, make sure you’ve sealed around all of those wires with silicone sealant and wrapped everything in electrical tape as extra protection against any possible water.

How to Install LED Strip Lights without Damaging the Wall

If you want to add extra light to your home without damaging your walls, then LED strip lights are a great option. Here is an explicit guide:

  1.  Measure the zone where you want to install the lights. Then cut the strip of lights to that length.
  2.  Clean the surface of the wall with alcohol wipes. This will help the adhesive strips stick better.
  3.  Peel off the backing on the strips and secure them on the wall.
  4.  Press firmly on the strips, so they adhere well.
  5.  Plug in the power supply unit and turn on the switch.
  6.  Admire your handiwork!

Adhering led strip lights to paint might cause harm to the wall paint. However, this obstacle can be overcome and LED lights can be installed without stripping the paint. Some homeowners use an epoxy sealant instead of adhesive. A couple of things should be considered before choosing this method: epoxy requires special primers and may not be as productive as other methods. Some alternatives for adhering LED lights to the wall include Velcro or nails, which could also leave marks or scratch the paint on your walls.

All LED light strips are not equally destructive to walls upon removal. People have tried peel and stick tape in the past, which did more harm than good. Finally, they found a way to have their cake and eat it too by using double-sided tape. Double-sided tape does not leave residue behind when removed, it is less harmful to surfaces, and it is easy to remove.

The final verdict on how to hang LED strip lights without damaging the wall? Use double-sided tape since it won’t hurt your paint job!

What to Do if You Damage the Wall?

installation of LED strip under the crib for lighting,install of led tape by the hands of a wizard

When inserting your LED strip lights, don’t worry if you ruined your wall finish. You can fix it with a few uncomplicated steps.

A quick fix for drywall damage is to use a joint compound, which can be found at any hardware store. It is typically used for patching holes in drywall or spackling, and can be found at most home improvement stores. After repairing the damaged area with joint compound or spackling, let it dry completely before applying another layer on top of it.

Another option is to cover up the damaged area with a matching piece of sheetrock and add new paint over it. This may take some time depending on how much damage there was and what type of materials were used on top of it.

How do I Carefully Remove LED Strip Lights?

You might quickly and easily remove your LED strip lights from the wall if you ever change your mind about them. Pulling them out is a little more complicated than just lifting them off, so here are some points on how to do it right:

  •  Check that no wires or screws are holding the light in place behind the surface of the wallpaper. If there are, try loosening these first before removing any others.
  •  Use a utility knife or other sharp object to cut through the adhesive backing at all points where it has adhered to the back of the light fixture.
  •  Begin gently pulling upward on one end of an LED strip light until you can grab hold of it with both hands.
  •  If there is an entire line of lights behind wallpaper, try pulling them all at once with a helper if possible. Otherwise, remove each LED light one at a time. The adhesive may fail on some lights while others come out quickly; use caution when removing any light fixture.
  •  Clean any adhesive residue off of your walls before rehanging. The most acceptable way to do so is by sanding it down or rubbing alcohol and a cloth.

How to Remove and Reuse LED Strip Lights?

It is challenging to remove led strip lights without doing some damage. You will need a heat gun and a putty knife. Heat up the area of your led strip light with the heat gun, then press it against the edge of the light. Once you have removed it from its adhesive, use your putty knife and peel back as much tape as possible.

Can LED Strip Lights Ruin Wood?

Most LED lighting fixtures don’t generate enough heat to ignite or damage the wood. However, depending on which LEDs you use and what type of wood you have, there is a possibility that your wood surfaces will be ruined over time by your new accent lighting. It’s not just the installation process that can cause damage.

If you install LED strip lights in an area directly exposed to sunlight or high levels of humidity, it could cause premature wear or degradation to your wood surface. You can still install strip lights near wood surfaces with no worry if they are installed correctly and then covered with plastic panels or a glass shade (or other material) so they are not directly exposed to any sources of moisture or sunlight.

Final Words

Installing LED strip lights without damaging the wall paint requires practice and the correct glue. Different ways to install led light strips depend on what you’re trying to accomplish. If you’re installing them on a short surface, like around a mirror or fireplace, then they should be installed with two-sided tape and a piece of plastic to cover the adhesive side so that it doesn’t damage your surface.

If you are installing them in long strips along a wall, then you’ll need a special tape designed for this purpose, but there are several types of tapes available. The most important thing is picking the correct type of tape for the specific area where you plan on installing your LEDs!



Leave a Comment


Subscribe to our newsletter to get shopping advice, our favorite gifts, and the best deals on Project Lights picks sent to your inbox.